Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Saris Locking Hitch Tite (Threaded)
$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris Hitch Tite
$12.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris Protect-O-Pads
$12.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris Extra Long S-Hook Straps 80
$11.99
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Saris Bike Beam
$39.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Freedom Fat Tire Wheel Holders
$49.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris B.A.T. Spare Tire Plate
$59.99
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
Yakima SKS Lock Cores (4-Pack)
$59.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Kuat Dirtbag 20
$19.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 20mm thru-axle, and you're all set.
Yakima SlimShady Awning
$279.00
Made for the shade, Yakima's new awning delivers excellent protection from searing sun and sudden showers. It mounts quickly and easily to the side of your base rack and only takes up six inches of bar space so it won’t crowd your kayaks, cargo boxes, or bikes. It’s super easy to use – just pull it out window-shade style and insert the poles when you get to camp. The light, strong nylon canopy has a waterproof PU coating to shed rain and delivers 42 square feet of shady coverage on summer days. Universal mounting hardware fits most roof racks. Product details: - Universal mounting hardware fits most roof racks. - Provides 42 square feet of sun and weather protection - Rolls into a 6.5 foot wide case when not in use, leaving tons of room on your roof rack for other gear - 420D-nylon fabric with PU coating is light, durable and waterproof - Easy to pitch – just pull it out, prop it up, and settle in - Super-simple attachment – no tools required - Includes locks to roof rack with SKS Lock Cores for added security Technical specs: - Weight: 20.00 lbs. - Dimensions: L 80.00” x W 4.00” x H 4.00”
RockyMounts Loball Locking
$49.95
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.
SportRack Adjustable Bike Stand
$179.95
- Neat, balanced mounting for every type of bike - Infinitely adjustable bike hangers - V-shaped soft rubber bike holders will not mar paint or crush cables - 1" x 2" steel construction won't bend, even with heavy cruisers - 31"(l) x 23"(w) x 81" (h) - Holds up to 2 bikes
Kuat Hitch Lock
$29.00
Küat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Kuat NV 2.0 Add-On
$439.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with intuitive release - Rear tire strap features co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
Kuat 1.25
$15.00
Kuat's 1.25" to 2" adapter mounts to your 1.25-inch Kuat Alpha, Beta, or Sherpa rack, allowing them to fit a 2-inch receiver. Mounting hardware included.
Yakima Thru-Axle Adapter
$15.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Yakima Fat Straps
$10.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
SeaSucker Cable Anchor
$30.00
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, they came up with their Cable Anchors. A Cable Anchor is just what it sounds like – an anchor point to securely connect a cable loop to your car. The Cable Anchor – Trunk has a steel rod that closes inside a trunk or hatchback seam. The Cable Anchor – Window slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375-inch hole to thread a cable lock through. The Cable Anchor Trunk is plastic dipped to protect your car’s paint.
SeaSucker Hogg
$100.00
Seasucker's high-end Komodo rack (rest assured, though, it works with any of their fork-mount racks) demanded some way to carry the front wheel as well, and the Hogg seemingly popped into existence. Replace your rear wheel’s axle nut with the anodized aluminum Hogg nut and then you can screw on the Hogg body when you’re ready to transport your bike. Your front wheel’s quick-release skewer clamps onto the Hogg body and off you go! Comes with an anti-rotation strap to stop your wheel from spinning pointlessly when attached.
SeaSucker Rear Wheel Mount With Strap
$50.00
This is a single 6-inch SeaSucker vacuum mount with a 1 1/2-inch wide hook-and-loop strap. When mounted to your vehicle it secures your bike's rear wheel and keeps the bike from moving left or right.
SeaSucker Add-On Front Wheel Holder
$45.00
Made to fit Seasucker's Bomber and Mini Bomber bike racks – just swap the Add-On Front Wheel Holder for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk anymore. Elongated entry slots for the skewer allow the wheel to rest on the platform of the rack, providing additional stability when driving. Made for standard road, cross and MTB wheels, but requires the MTB Plugs (sold separately) to hold a 15/100mm or 15/110mm (Boost) through-axle. Made from .25-inch powder-coated aluminum.
SeaSucker Rear Wheel Strap
$50.00
Replacement 6-inch SeaSucker with a 1.5-inch wide hook-and-loop strap to secure your bike’s rear wheel and keep it from moving left or right when driving. 
SeaSucker Boost Spacer
$8.00
Boost front hubs exploded on the scene in 2015/2016 and SeaSucker needed a way to mount them to their 15mm Fork Mount. Lo and behold, this 15mm round, 10mm wide spacer they made works like a charm. Just insert your skewer through your fork and 15mm fork mount, then slip the spacer in between the far side of your fork and the fork mount before you finish pushing the skewer through and screwing it tight.
SeaSucker 15mm Fork Mount
$25.00
Most decent mountain bikes these days come with 15mm through-axles up front. You have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 15/100mm fork mount. The 15mm fork mount is bolt-on, meant for riders who are always using their rack with their thru-axle bike. According to Seasucker's friend and MTB pro Macky Franklin: “The 15mm fork mount is perfect. So much steadier than using the adaptor.” If you’ve got a Boost front hub (15/110mm), make sure to get one of Seasucker's Boost Adapters (sold separately) to get the fit right.
SeaSucker Compact Rear Wheel Strap
$45.00
Sometimes the standard 6-inch Rear Wheel Strap that’s provided with the Talon, Mini Bomber or Bomber doesn’t fit in the space available on your car, and so Seasucker offers a more compact version with their smaller 4.5-inch SeaSucker vacuum pad (which spreads out to approx. 4.75-inch when mounted). The Compact Rear Wheel Strap does NOT have the cupped rear wheel housing that comes standard with the regular Rear Wheel Strap.
SeaSucker 20mm Fork Mount
$25.00
If you’re riding a 20/110mm front hub, you have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 20mm fork mount. The 20mm fork mount is bolt-on and is meant for riders who are always using their rack with their thru-axle bike.
RockyMounts MonoRail Single Bike Add-On
$169.95
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
Delta Crossbar Substitute
$29.99
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
SportRack Bike Stand
$99.95
- Locking clamp gently holds the down tube of the bike for greater stability - Large wheel tray holds your bike securely during transit - Locks included to secure the bike to the carrier - Mounts directly to most factory and aftermarket rack systems (max 3.5" crossbar diameter) - Fits 1"-2.5" diameter and elliptical bike frames - Holds 1 bike - Max weight of 45 lbs/ 20 kg
Yakima DeadLock
$49.00
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Page 1 of 4 Next page