Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$30.50
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Shimano XTR M900 Left Crank Arm
$208.00
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
MRP Mini G4
$169.95
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - NEW Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Available in "Mini" 32-36t and "Mega" 36-40t sizing - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells)
e*thirteen by The Hive Chain Guide Lower Slider Kit
$12.95
- Lower slider replacement parts for E-13 chainguides
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.00 - $6.00
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
North Shore Billet 1x11 Spider for SRAM Cranks
$70.00
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
North Shore Billet 2x10 Spider for SRAM GXP Cranks
$70.00
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Shimano STEPS CITY E6000 Right Crank Arm
$27.00
- Replacement right-side crank arm for Shimano STEPS City E6000.
MRP Mini G4 Carbon Chain Guide
$224.95
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - NEW Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells)
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$29.50
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Race Face Cinch Direct Mount Spider
$59.99
Race Face direct-mount chainring spider for Cinch ranksets.
Easton EC90 SL Crank Spindle
$89.99
Replacement crank spindle for Easton EC90 SL cranks
SR Suntour XCT Left Crank Arm
$15.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
MRP G3 Steel
$89.95
The G3 features MRP's patented integrated skid (US Patents RE 42,436 / 8,235,849 Patents Pending), which protects critical drivetrain components like the crank and chainring from damage and glides over rocks and obstacles. The skid and lower guide are combined into one solid structure. The skid and lower guide also feature our new attachment system, the Swingset. The Swingset system features a pivot at the forward skid mount that allows the skid to swing down for super easy crank and chainring installation. - Integrated skid protects chainrings and glides over rocks and obstacles - Includes standard pulley and new G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Nylon upper guide - Quietring wrap on the upper guide's tail mitigates chain-slap - 34-38t sizing - Stamped steel backplate - All install and adjustment operations possible with just a single 4mm HEX wrench. - 236g (ISCG-05)
MRP SXg Alloy
$169.95
With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it’s the first guide in history that’s equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It’s a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it’s a whole lotta rock. High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper™ technology provides lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians. - Whippersnapper™ lower guide. - Full-size, nylon HD upper guide with co-molding. - Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles. - Nylon and TPU co-molding in the Whippersnapper™ provides durable protection from external blows and mutes internal contact with the chain. - Swingset™ hardware. - All installation and adjustment operations are possible with just a single 4mm HEX wrench. - Available in 30-34t and 34-38t sizing. - Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible. - ISCG-05 only. - 149g (34-38t Alloy ISCG-05)
Wheels Manufacturing Inc. BB30/PF30 Multi-Adapter Kit
$200.00
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for chainline adjustment and a puller for removing adapters - Includes: (8) Shimano adapter (24mm ID, Shimano right or left; SRAM right only), (4) SRAM-left adapter (22mm ID, Shimano right or left; SRAM right only), (4) SRAM-right adapter (24mm ID, Shimano right or left; SRAM right only), (12) 0.7mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 2.5mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (8) 1.0mm spacer - left (30mm ID, SRAM), (4) 2.5mm spacer - left (30mm ID, SRAM), (4) 5mm spacer - left (30mm ID, SRAM), (4) 10mm spacer - left (30mm ID, SRAM), (8) wave washer, (1) removal tool for pulling adapter out of BB
Wheels Manufacturing Inc. FSA PF30 Adapter for 24mm Spindle Cranks
$30.50
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
e*thirteen by The Hive Lg1+ Chain Guide
$159.95
- Adjustable wearplate with chainring size indicators allow for 28-38T chainring capacity and easy adjustment - Gen 2 Stealth Idler pulley for smooth and quiet operation - 28/30, 32/34, 36/38t direct mount bashguard included - ISCG-05/BB models include ISCG-05 to BB adapter plate - 136g (30t), 159g (34t), 167g (38t) - Range: 28-38t
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$29.50
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Shimano Crank Bolts
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
MRP AMg V2 Carbon
$169.95
The newly redesigned All-Mountain Guide is the love child of two innovative and revered product lines, the 1x and XCg. Perfectly suited to the increasingly popular all-mountain segment, the All-Mountain Guide shares the freshly updated "TR" upper guide with the 1x, and adds MRP's patented integrated skid. The All-Mountain Guide is a great choice for 5-6" travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention means the All-Mountain Guide will be virtually silent and completely drag-free when pedaling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. - Perfect for "clutched" 1x10 and 1x11 drivetrains, as well as those using chain-retaining rings (like our Wave Ring) - New nylon integrated skid protects chainrings and glides over rocks and obstacles - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - Available in 28-32t and 32-38t sizing - All install and adjustment operations possible with just a single 4mm HEX wrench. - Compatible with chainlines 49mm and wider
e*thirteen by The Hive Chain Guide Idler Pulley
$12.95
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
TruVativ BMX To Threaded (BSA) BB Adapter
$20.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
Wolf Tooth Components 104 Bash Ring
$39.95
- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Page 1 of 4 Next page