Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bottom Brackets

CeramicSpeed ITA for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency. In the box: • 2 cups with CeramicSpeed Bearings installed • 2 dustcovers • 4 x 1mm spacers • 10ml syringe of CeramicSpeed All Round Grease • Sticker sheet
CeramicSpeed BB30 for SRAM GXP
$359.00 - $459.00
When you want to install SRAM or Quarq’s 24/22mm diameter thru-axle crank into a bottom bracket shell measuring 68mm wide and 42mm in diameter, you need CeramicSpeed’s BB30 SRAM GXP bottom bracket. The CS bearings are hand-assembled and installed into aluminum cups that thread together for quiet durability without adapters. There are two bearing options. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box: • Bottom bracket with bearings installed. • 2 dust covers. • 1mm spacer. • 0.5mm spacer. • GXP wave washer. • 10ml syringe of CeramicSpeed All Round Grease. • Sticker sheet. About CeramicSpeed coatings: CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
CeramicSpeed BBright for Shimano
$359.00 - $459.00
BBright is the Cervélo bottom bracket standard, found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box: • 1 bottom bracket with bearings installed. • 2 dust covers. • 10ml syringe of All Round Grease. • Sticker sheet. About CeramicSpeed coatings: CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
CeramicSpeed PF30 for Shimano Road
$359.00 - $459.00
The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter thru-axle cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. There are two options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. In The Box: • 1 bottom bracket with bearings installed. • 2 dust covers. • 10ml syringe of All Round Grease. • Sticker sheet. About CeramicSpeed coatings: CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
CeramicSpeed PF30a for Shimano
$359.00 - $459.00
PF30A is a Cannondale-specific standard for their 73mm wide bottom bracket shells. This CeramicSpeed kit makes it possible to install Shimano and other 24mm diameter thru-axle cranks into a Cannondale frame. CeramicSpeed Bearings come installed in two cups and are connected through the shell via a spacer tube. There are versions with Standard and Coated Bearings. Both have super round CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated have an additional attribute: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life. In The Box: • 2 CeramicSpeed bearings pressed into cups. • 2 installed dust covers. • Spacer tube. • 10mm syringe of All Round Grease. • Installation tool. • Sticker Sheet. About CeramicSpeed coatings: CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
CeramicSpeed ITA for Shimano
$359.00 - $459.00
Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter spindle cranks into an ITA shell. Those cranks come from Shimano, FSA, and others. CeramicSpeed bearings pressed into threaded cups, then threaded into the frame. Those bearings comprise either Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. In The Box: • 2 threaded cups with bearings. • 2 dust covers with built-in spacers. • Spacer tube. • 10mm syringe of All Round grease. • Sticker sheet. About CeramicSpeed coatings: CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of theCeramicSpeed Balls results in virtually no wear on the bearing. The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
CeramicSpeed PF30 for Shimano MTB
$459.00
The PF30 standard has opened design possibilities for mountain bikes. Our CeramicSpeed PF30 Shimano MTB Bottom Bracket gives you the ability to install Shimano and other 24mm diameter spindle cranks on your PF30 MTB. The system feature two cups with CeramicSpeed Bearings installed. There is both a Standard and Coated version. Both feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional benefit: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life. In The Box: • 1 bottom bracket with CeramicSpeed bearings installed. • 2 dust covers. • 5 0.85mm spacers • 10ml syringe of LongLife Grease. • Sticker sheet.
Page 1 of 1