SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.
$339.99 - $684.99
Flawless shifting, superb ergonomics, and state of the art technology? Shimano's Dura-Ace Di2 Dual Control Levers embody all of these concepts. Utter simplicity and ease of use are the hallmarks of these shifters, with gracefully curved lever blades that offer two, easy-to-reach fingertip buttons. The shifting controls are easily accessible from either the hoods or the drops, so you'll have total control from any position on your handlebar. The E-Tube wiring harness is simple, clean, totally waterproof, and runs beneath the bar tape for a super clean look.
Potenza 11 HO Ergopower disc-brake controls offer the same braking performance as the rest of the H11 range. Both the Potenza 11 mechanical transmission and the sophisticated Campagnolo master cylinders are located within the Ergopower, which has remained largely unchanged. Fitting both components into the same space was a difficult task, but necessary to preserve the exceptional ergonomic qualities of Campagnolo shifters. This high level of ergonomics allows riders not only to personalize the initial position of the lever, but also to set braking modularity and aggressiveness. - Integrated brake/shift lever with hydraulic line and flat mount disc caliper attached - Shift lever features 11-Speed Power-Shift shifting providing the ability to up shift 3 sprockets and down 1 - Composite lever body with alloy brake lever - Brakes are shipped dry, and require bleeding after installation. Compatible with both Campagnolo and Magura bleed fittings - Requires the use of MY18 and newer Potenza cranks or H11 cranks - Adjustable reach and lever throw - Vari-Cushion silicon hoods provide variable cushioning zones to optimize comfort while grooved areas drain water away improving grip - Double curvature brake lever allows for engagment and modulation from any hand position - Includes genuine Campagnolo shift cables and housing
$167.99 - $349.99
Shimano Ultegra R8000 dual control levers. - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Even lighter front shifting when paired with redesigned FD-R8000 - 2x11-speed - Model Number: ST-R8000 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 220 grams
Shimano Tourney ST-A070 shift/brake levers are ergonomic touch points for operating both the bicycle's brakes and shifting for 2x7 or 3x7 drivetrains. - Optical gear display - Adjustable reach
Replacement Hydraulic lever only. Does not include rubber hood or brake caliper. Includes 2000mm hose and fittings - Drivetrain Speeds: 11 - Brake Lever Actuation: Hydraulic - Shifter/Derailleur Compatibility: SRAM 11 - Cassette Spacing: Shimano/SRAM 11 - Adjustable Reach: Yes - Brake Lever Actuation: Hydraulic - Rear Der/Shifter Compatibility: SRAM Exact Actuation
Shimano's 105 Dual Control Left-Side Lever (Triple) is for use with a triple crankset and a triple front derailleur. Shimano's Dual Control levers let you shift and brake without ever taking your hands off the handlebars. The short-stroke shifting is so telepathic you'll be in the gear you want almost before you realize you shifted. Plus, the robust design offers excellent durability and the hoods are ergonomically contoured for top comfort.
The Claris Rapidfire Plus shift/brake lever offers an elegantly integrated solution for braking and shifting 2x8 or 3x8 drivetrains. Its optical gear display lets you know what gear you're in, and the reach adjust brake lever allows you to dial in the brake lever ergonomics.
The R9120 Dual Control Lever offers a shorter lever stroke, an expanded reach adjustment range for precise lever position, and lighter front shifting operation for quick and intuitive shifting and braking in all situations. Further improvements are its renewed hood cover material and its comfortable ergonomic shape with more grip. - Quick and intuitive rear shifting operation - Consistent braking performance in any condition - Easy brake control hydraulic brake - 11-speed compatible
$139.99 - $289.99
Shimano's Tiagra Dual Control Lever (2x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. -Model Number: ST-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Front Shifting: 2 - Shift Cable: Lever side:OT-SP41 / RD side: OT-SP41 Sealed - Reach Adjuster: Screw
The new mechanical Ergopower 12x2 Speed Record controls take full advantage of the widely respected, proven Campagnolo technologies and have become indispensable for those who are in the saddle for extended periods. One such technology is Vari-Cushion, which offers ergonomic, comfortable and safe support and grip. There is also the “one lever, one action” feature that assigns each lever one function to prevent shifting errors. The Ultra-Shift mechanism enables upshifting up to three sprockets at a time and downshifting a full five. Furthermore, the new mechanical Ergopower 12x2 Record controls offer lever adjustability that utilities Reach Adjustment to move the brake lever closer to the low grip, thus adapting to the different hand sizes. AMS Adjustment allows modulating the moment of shift engagement through the use of specific levers. The carbon fiber brake levers feature a unidirectional disposition of the fiber to ensure they match seamlessly with the other components of the groupset.
$174.99 - $349.99
Shimano delivers their trademark smoothness and ergonomics with the 11-speed Ultegra shift levers. Pro Tour-proven tech, like the shifter internals and polymer-coated shift cable, offers shifting at the speed of thought with jaw-dropping light action and defined tactile feedback for the rider. Hand-pleasing ergonomics offer near perfect hood and lever placement so these controls are comfortable all day long, whether you're cruising on the tops or deep in the drops. Special attention was paid to the shape of the brake lever, offering you incredible ergonomics from the drops and more power from the hoods. On top of all that, stealthy, under-the-tape cable routing cleans up the front of your bike, with a clean, minimalist, and pro look.
$378.99 - $849.99
- Quick And Intuitive Rear Shifting Operation - Shorter Lever Stroke - Redesigned Internal Shifting Unit - Lighter Front Shifting Operation - Redesign Front System With New Front Derailleur - Comfortable Grip And Operation - More Customizable And Precise Lever Position - Expanded Reach Adjustment Range (14 Mm) Mechanical Brake - Consistent Braking Performance In Any Condition - Easy Brake Control Hydraulic Brake
The SRAM Rival 22 Mechanical Shifters are modeled after the phenomenal RED shifters. SRAM not only trickled down 11-speed compatibility, but ErgoFit elements such as a slightly longer brake lever to enhance control, independent reach adjustment for brake and shift levers, and a smaller diameter hood with a taller top shape to increase rider control and improve finger wrap. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for faster, smoother shifts while being completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. Plus, the forged aluminum brake lever and shift paddle offer a beautiful balance of low weight and impressive durability.
$199.99 - $419.99
- Slimmer, More Aerodynamic Shape And Improved Grip Feel - Optimum Power Transmitted With Firm Grip - More Control And Confidence In Race Condition - Improved Shift Switch Placement For Operation Without Removing Hands From The Bars - Intuitive Shifting Control - Single Button On Each Side Of The Shift Lever Designed To Work With Synchro Shift - Each Switch Available With Multi-Shift On/Off - Increased E-Tube Project Customization - Each Switch Has The Option For Multi-Shift - Customizable Function To Fit Any Riding Style - Integrated E-Tube Cable And Internal Brake Cable Routing For Enhanced Cockpit Aesthetic And Aerodynamics
New mechanical Ergopower Super Record 12x2 Speed Disc Brake controls: more ergonomic, more precise, more powerful and easier to maintain. Comfort, control, speed, and responsiveness are some of the main features of a bike's controls, helping keep all situations under control. The new mechanical controls for the Ergopower Super Record 12x2 Speed Disc Brake offer an ergonomic, comfortable and safe support and grip thanks to Vari-Cushion technology, essential for those who stay on the saddle for several hours. The controls’ inner workings are a concentration of technology and experience, starting with the “one lever, one action” function, which assigns each lever a single function, helping avoid shifting errors at tired or distracting moments, and then continue with the multiple shifting option which allows up- or downshifting by up to 5 sprockets at a time thanks to the Ultra-Shift mechanism. This function allows you to maintain cadence even in case of sudden changes of incline or rhythm, with speed and ease as useful as it is surprising. Further useful features are the levers’ adjustability, which, thanks to Reach Adjustment, enable a low grip on the brake lever, helping those with smaller hands; and AMS Adjustment, which enables shifting time modulation, using the dedicated levers. The Super Record Disc Brake brake levers are engineered with a double curvature for improved grip and are lightened with two slots that are added to the one dedicated to Reach Adjustment.
Integrated brake/shift lever with hydraulic line and flat mount disc caliper attached. Shift lever features 11-Speed Ultra-Shift shifting providing the ability to up shift 5 sprockets and down 3. Composite lever body with carbon brake lever. - Brakes are shipped dry, and require bleeding after installation. Compatible with both Campagnolo and Magura bleed fittings - Requires the use of H11 crankset and MY15 and newer Chorus, Record or Super Record derailleurs - Adjustable reach and lever throw - Ultra-Shift Ergonomics design makes it possible to utilize three different hand positions on the levers - Vari-Cushion silicon hoods provide variable cushioning zones to optimize comfort while grooved areas drain water away improving grip - Double curvature brake lever allows for engagement and modulation from any hand position - Includes genuine Campagnolo shift cables and housing
SRAM's DoubleTap Control Levers are the cornerstone of SRAM's road biking world. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for fast, smooth shifts, and is completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. The carbon fiber ergonomic levers are incredibly light and aero, while hiding all the cables for an ultra-clean look.
$269.99 - $611.99
Shimano Ultegra ST-R8070 Di2 hydraulic disc brake dual control levers. - Intuitive shifting operation - Updated features and more defined click feeling - Clearer separation between shift buttons support quick and precise shifting while operating with thick gloves - Customizable functionality to match the rider's style - Each switch has the option for multi-shift ON or OFF - E-TUBE PROJECT - Programmable function of ST top button remote switch for third party cycle computer and shifting - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Small bracket size improves ergonomics - Customize each SW for multi-shift on or off per SW through E-tube project App. - Greater reach adjust range and free stroke adjuster - Lightweight race-ready materials - More quick and precise shifting while operating with thick gloves - 2x11-speed - Average Weight: 180 grams
- Shimano road shifter name plate and fixing screws
Shimano 105 ST-R7000 shifters offer quick and intuitive rear shifting operation and reliable performance in race conditions. - Brake Lever Actuation: Short Pull - Adjustable reach
$268.99 - $613.99
Shimano Ultegra R8020 hydraulic shift/brake levers. - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Small bracket size improves ergonomics - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Model Number: ST-R8020 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 550 grams/pair
SRAM RED eTap features race-car-inspired paddle shift logic that virtually eliminates mistaking upshifts for downshifts, while keeping shifting precise, fast, and easy. It’s a logic that is simplified for speed: right lever makes it harder, left lever makes it easier, both levers to change the front ring. Our revised ErgoFit controls seamlessly connect rider and machine with Reach Adjust to fit any hand. You’ll shift more, with less effort and spend less time doing it. Carbon ErgoBlade levers and large SRAM eTap paddles provide positive controls for rider input. - Compatible with SRAM RED eTap derailleurs - SRAM Road 2x11-speed compatible - Voted Innovation of the Year by RoadBike Magazine (Germany) - SRAM RED eTap shifting logic - Wireless connection via AIREA network for fast and clean installation - Revised ErogoBlade levers provide confident control - eTap logic and positive feedback paddles eliminate shifting mistakes - Brake lever material: Carbon - Shift lever material: Plastic
$13.99 - $18.99
The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)
The Shimano Claris ST-R2030 is a dual control brake/shift lever for Shimano 2x8 and 3x8 drivetrain applications. It features a reach adjust mechanism and Shimano's Super SLR friction-reducing technology. - Reach Adjust mechanism allows for the distance from the handlebar grip to the lever to be adjusted to suit any hand size or riding style - Super SLR technology improves braking response and modulation by reducing friction through the caliper, lever, and cable - The Dual Control Lever has both brake and shifting functions in the system to enable simple operation - Includes OT-SP41 cable housing to maximally reduce the inner cable friction for quick response to operations and effortless shifting
$264.99 - $549.99
- Quick And Intuitive Rear Shifting Operation - Shorter Lever Stroke - Redesigned Internal Shifting Unit - Lighter Front Shifting Operation - Redesign Front System With New Front Derailleur - Comfortable Grip And Operation - More Customizable And Precise Lever Position - Expanded Reach Adjustment Range (14 Mm) Mechanical Brake - Consistent Braking Performance In Any Condition
SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No
$185.00 - $369.00
Comfort plays a big part in speed—that's why SRAM designed the Force 22 ErgoDynamic Shifters with an ErgoFit textured body and refined hood shape that improve grip and provide a smooth transition to the bar. These 2x11-speed shifters are crafted with carbon and magnesium for an incredibly low weight you'll notice as soon as you wrap your hands around them. Individual reach adjustment of the ErgoBlade brake and shift levers put the controls exactly where you want them. And, with an understated black finish, the Force 22 Shifters are a great match for any machine.
SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!
The Apex shift-brake control features DoubleTap technology, which offers benefits such as independent reach adjust for both shift and brake levers. The Apex shift-brake control utilizes a single lever for shifting and a dedicated lever for braking. All of these mechanical features are packaged in a 344g package. - Proprietary DoubleTap technology delivers smooth up- and downshifts in one motion - Ergonomic design is comfortable, aerodynamic, and hides all cables, while weighing only 344g - High pivot brake lever with Reach Adjust
Page 1 of 3 Next page