Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
$29.99 - $32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
$49.99 - $69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
$60.99 - $75.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Lengths: 35 - 110mm - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets. - Stack Height: 40mm - Weight: 180g
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Basic, clean, and dependable performance – that’s FSA's Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer’s shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - Stack Height: 40mm - Weight: 154g
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.
The Pro FRS stem is constructed of 3D forged AL6061-T6 aluminum for ultimate strength, providing supreme confidence and control on the slopes.
With the best materials and construction, torsional stiffness fit for the hardest riding and biggest jumps, and the great style that's in all of Thomson's components, their Direct-Mount Stem is the perfect upgrade for your DH rig. It's made of tough 7000-series aluminum bar stock with heat-treated bolts and it has a 65mm-wide handlebar clamp so you get rock-solid steering and control and outstanding durability.
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
$39.00 - $40.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
$29.99 - $32.00
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
$29.99 - $32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Page 1 of 4 Next page