Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Spank 350 Vibrocore 29-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Hope Fatsno 15x142mm Front Conversion Kit
$29.21
15x142mm conversion kit for Hope Fatsno front hubs.
Shimano Dura-Ace R9170 C40 Carbon Tubular Front 700c
$1,111.99
The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles
SRAM Roam 60 27.5-inch Replacement Spokes/Nipples/Washers
$26.00
3-pack, 280mm CX-Sprint Straight-Pull External Black for Roam 60 27.5 Wheels
Race Face Arc/Aeffect Rim Decal Kits
$29.99
Hop up your rig with these custom rim decal. Available for the entire Arc rim range (24mm - 45mm) as well as Aeffect SL, R and Plus. Each set comes with enough decals to do a complete wheelset (2 wheels). Now your bike can be as pro as your riding kit!
Stan's NoTubes Spoke Powder Assembly Compound
$13.00
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples
Stan's NoTubes Baron MK3 27.5-inch Rear
$380.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Ritchey WCS Axle and End Cap Kit for Apex II and Zeta II Rear Wheel Shimano HG Freehub
$47.95
12mm thru-axle conversion kit for converting from thru-axle to QR. - Includes axle and end caps - Replacement axle and end cap for Phantom Flange rear road hubs - No tools necessary
Ritchey WCS Freehub Body for Apex and Zeta SRAM XD
$54.95
Replacement XD driver freehub body for all road 2-piece Ritchey hubs. - SRAM XD - No tools necessary
Ritchey WCS Carbon Vantage Wheelset: 29-inch Boost Centerlock Tubeless
$1,499.00
The WCS Vantage wheel is as advanced as it gets, but shares DNA with earlier Ritchey models raced to numerous National and World Cup podiums in the 1990’s. Those decades of winning heritage beautifully coalesce with modern advancements and standards to produce a mountain bike wheel that’s strong, nimble, and built to perform and win. Featuring a new, wider 3mm tall OCR (Off Center Rim) profile, BOOST hub widths, and incredibly tough monocoque design, the Vantage is at the front of the pack in terms of weight, stiffness, and durability. The OCR build also reduces wheel dish and improves spoke bracing angle for a stronger, laterally stiffer build. The tubeless-ready, 26mm internal-width rim boosts air volume and reduces sidewall flex when riding big tires. - WCS Vantage tubeless 24h OCR rims - Tubeless Ready internal profile - Rim diameter: 29" - Rim depth: 25mm - Outer width: 32mm - Inner width: 26mm - Hubs: Ritchey-designed cold-forged WCS hubs with oversized, premium quality cartridge bearings - Front BOOST Hub: 110 x 15mm - Rear BOOST Hub: 148 x 12mm - Spokes: DT Competition Black - Nipples: DT Brass Black - Build: 24/2x - Freehub: alloy - Shimano Center Lock Disc Brake Mount (6-bolt adapters sold separately) - SRAM XX1 (XD) driver available - Matte carbon finish - Weight (27.5): 736g (front) / 817g (rear)
WeThePeople Supreme Hub Guards
$16.99
WeThePeople's Supreme Hub Guards are made of low-friction nylon fiberglass. Simply replace the cones on your Supreme Front and Cassette Hubs for a perfect fit without having to spread your dropouts. Available for both front and rear. These guards now feature a heat-treated chromoly insert for longer life.
WeThePeople Supreme Front Hubs
$80.99 - $83.99
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
Spank Spoon 32 Rim
$69.90
Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready
Hope Fatsno 15mm Front Conversion Kit
$29.21
15mm thru-axle conversion kit for Hope Fatsno front hubs.
Hope Pro 2 Evo Rear 12x142mm Conversion Kit
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Chris King ISO 135 QR
$460.00 - $504.00
Make Chris King's ISO Rear Hub the first and final choice for your bomb-proof, any trail, anywhere wheels. This quick-release rear hub is the fast-rolling, high-mileage piece of gear that your bike has been waiting for. The large diameter hub shell uses Chris King's made-in-house stainless-steel bearings for unbeatable strength and durability, and the freehub offers near-instantaneous pedal engagement. Six-bolt rotor compatibility keeps setup and parts choices simple so you can spend more time riding. And, this hub is compatible with either 10mm or 142 x 12mm replacement axles (sold separately).
Chris King R45 Cassette Lockring
$37.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Shimano Dura-Ace Track Low-Flange Front Hub
$130.99
• Model Number: HB-7710-F • Series: DURA-ACE • Over Locknut: 100mm • Axle Type: 142mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 38mm • Hub Shell: aluminum • Center to Flange (Right): 37mm • Center to Flange (Left): 37mm • Average Weight w/o QR: 203g
Zipp Disc Wheel Valve Cover Patches
$6.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
WTB Asym TCS Rim 27.5-inch
$84.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Velocity A23 700c Rim
$93.99
- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup
Sun Ringle Mulefut 50SL Wheelset
$209.99 - $289.99
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50! PRODUCT SPECS: - STR SUNringle Tubeless Ready - 50mm rim width - Premium cartridge bearing straight pull hubs - Quick release front axle 100x15 and 110x15 - Rear axle options: 142x12, 148x12 - Wheelsmith straight pull double butted spokes - Wheelsmith brass nipples - 32 hole count - Weight / Set: 2220g (27.5") 2310g (29")
Chris King Low Profile Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Fits Chris King ISO SD Front, and Classic Rear
Manitou Hexlock Axle
$39.99
Replacement axles for Manitou forks
Sun Ringle Envy Rim
$55.00
Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only
Odyssey Clutch Freecoaster Hub
$189.99
A traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment (can be adjusted without removing the rear wheel), and a plastic hub guard. FEATURES - Super-durable bearing arrangement throughout - Maximum strength axle design Unique external slack adjustment feature - Super-durable drag mechanism design GUARD OPTIONS - Plastic hub guard included (but optional to use) MEASUREMENTS - Drive Side Effective Flange Diameter: 56mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 27.5mm - Non-Drive Side Flange to Center Distance: 27.5mm
WeThePeople Supreme Front Bearings
$23.99
Did you trash the front bearings on your WTP Supreme front hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
WeThePeople Helix Driver Guard
$21.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit