Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Chris King XD Driveshell
$285.00
Chris King ISO XD Driveshell assembly, complete with bearings.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Campagnolo Hub Rebuild/Upgrade Kit
$87.90 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
SRAM Rise 40 Conversion Cap Tool
$9.00
SRAM's Rise 40 Conversion Cap Tool will allow you to easily change the conversion caps (sold separately) on your Rise 40 wheels.
Chris King High Profile Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Includes one High Profile (HP) Adjustment Clamp - Fits all Chris King ISO/Disc Rear Hubs
Stan's NoTubes Neo Front Hub Torque Caps
$20.00
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo and Neo Ultimate hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
Stan's NoTubes Neo Speedsync Freehub
$130.00
Stan's original Neo hub has evolved to be stronger and more reliable than ever. The additional stress of larger cassette cogs, more capable bikes, and even more challenging trails led to the creation of the Neo with Speedsync. This CNC machined Speedsync freehub is a direct replacement for your Neo hub and includes pawls, springs, pawl retaining ring, and 2 red freehub spacers. Bearings are pre-installed. Note: - Singlespeed freehub cannot be used to convert a hub originally set up with a Shimano or Sram XD freehub to SS. This freehub is only to be used with Stan's Neo SS hubs. - OneUp freehub WILL NOT WORK with a SRAM cassette or Shimano cassette without a One Up Shark Cluster.
Stan's NoTubes Spoke Powder Assembly Compound
$13.00
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples
Cane Creek Helm D-Loc Thru-Axle
$55.00
Thru Axle for Helm suspension forks.
WeThePeople Supreme Hub Guards
$16.99
WeThePeople's Supreme Hub Guards are made of low-friction nylon fiberglass. Simply replace the cones on your Supreme Front and Cassette Hubs for a perfect fit without having to spread your dropouts. Available for both front and rear. These guards now feature a heat-treated chromoly insert for longer life.
WeThePeople Supreme Front Hub Female Bolts
$28.99
If you're going to push yourself, you need to be able to rely on your equipment. Make sure your front wheel is super secure with these WeThePeople Supreme Front Hub Bolts. For best results: replace when ground to nubs.
WeThePeople Supreme Front Bearings
$23.99
Did you trash the front bearings on your WTP Supreme front hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
WeThePeople Supreme Front Axle/Cone Set
$28.99
This is an axle and cone set for WTP Supreme hubs. Pop this in to freshen up that bombed-out hub after too many aerial ghost rides.
WeThePeople Nylon Rim Tape
$6.99
You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims. - Strong - Lightweight - Tube-proof
WeThePeople Helix Rear Hub Bearing Set
$14.99
Are the bearings on your WTP Helix rear hub getting a little crunchy? Yeah, that happens when you're punishing your bike with progressing all the while. Fear not, we've got you covered with this high-quality replacement bearing set from WeThePeople. - Seal color may vary, but the high quality stays the same
WeThePeople Helix Freecoaster Hub
$154.99
WeThePeople took the tried and tested features from the best freecoasters to date and then developed their very own patented 3 point clutch friction system, making the Helix Freecoaster the most durable and reliable free coaster of its kind. Paired up with a pair of WTP plastic hub guards, the Helix will roll front or back like butter and hold up to any peg abuse that comes its way. - 9T driver - 14mm axle
WeThePeople Arrow Front Hub Bearings
$23.99
Did you trash the front bearings on your WeThePeople Arrow front hub? It happens, that just means you're riding a lot. Fear not, we've got you covered with this bearing set from WeThePeople.
Chris King Low Profile Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Fits Chris King ISO SD Front, and Classic Rear
Ritchey WCS Axle and End Cap Kit for Apex II and Zeta II Rear Wheel Shimano HG Freehub
$47.95
12mm thru-axle conversion kit for converting from thru-axle to QR. - Includes axle and end caps - Replacement axle and end cap for Phantom Flange rear road hubs - No tools necessary
Wheels Manufacturing Inc. Taiwan Cone Kit 4
$110.00
Taiwan Hub Cone Kit is a 26-piece cone assortment for 9.0mm & 10.0mm axles in a convenient plastic storage box. Kit Contains: - (8) CN-R081 - (4) CN-R082 - (4) CN-R083 - (4) CN-R084 - (2) CN-R085 - (4) CN-R086
Zipp 10-speed Freehub Conversion Kit for 2009-2012 188 Hub
$110.00
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed (Red), Campagnolo 10/11 Speed (Blue) - Material: Aluminum
SRAM 9/10 Speed Freehub Body for 746 Rear Hub
$70.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Right Axle End Cap
Velox Jantex Adhesive Tubular Rim Tape
$9.95
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
Spank Spoon 135/150 Freehub Bodies
$60.00
These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.
Zipp 11-speed Freehub Kit for 177 Hub
$97.99 - $136.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
SRAM Conversion Cap & 9/10-speed Driver Body for Roam 60/50 and Rail 50 Wheel
$140.00
SRAM's Conversion Cap & 9/10-speed Driver Body is just what you need to convert your XD Driver equipped wheel to a standard cassette.
Zipp Tangente Quick Release Skewer Set
$50.00 - $91.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
Zipp Disc Wheel Valve Cover Patches
$6.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Wheels Manufacturing Inc. CN-R099 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 12.7mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Deore LX HB-M570 Front - Shimano Deore XT HB-M750 Front
Wheels Manufacturing Inc. Axle-19
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
Page 1 of 8 Next page